Ss Brewtech - Keg Washer

Ss Brewtech - Keg Washer


The Ss Brewtech Keg Washer provides the optimal way to clean any Cornelius style kegs.


Don't worry about disassembling or removing dip tubes, QD posts, and other fittings from your keg as the components are all cleaned in place. This Washer fits inside of a standard 5 gallon bucket.


You can easily setup a cleaning keg station with 3 separate buckets to clean, rinse, and sanitize. Simply keep the Washer attached to the keg and go from one bucket to the next until your keg is fully cleaned, rinsed, and sanitized!


Due to the only requiring 7.5 litres (2 gallons) of cleaning solution you can cut back on chemical waste allowing you to save money and cut back on the environmental impact of the chemicals.



  • 1 - Remove the keg's lid and insert the spray ball portion into the interior of the keg.
  • 2 - Rotate the keg to secure the lip against the silicone base plate.
  • 3 - Make sure the silicone hose portions are tight in place.
  • 4 - Secure the lock nut and tighten the entire assembly.
  • 5 - Using the included ball lock quick disconnects attach them to the gas-in and the liquid-out posts.
  • 6 - Flip your keg upside down and put the assembly into a standard 19 litre (5 gallon) bucket that contains 7.5 litres (2 gallons) of cleaning solution.
  • 7 - Active the pump.



  • Can be used hands free
  • Fully submersible chemical resistant pump
  • Attaches to standard ball lock Cornelius style kegs with removable lids
  • Strong CIP spray ball
  • Entire unit fits inside of a 19 litre (5 gallon) bucket
  • Cleans the insides of both the ports and kegs at the same time
  • Quick and easy disconnection/connection to kegs
  • Clean, rinse, and sanitize all with the same unit


  • 6.35 mm (1/4") OD barbs
  • 605 mm (12") Height x 260 mm (10 1/4") Diameter